🔥 Heating
How Much Does a Heating Pad Cost to Run?
At the current U.S. average rate of 18.4¢/kWh (May 2026), a heating pad costs about $0.34 per month at typical usage — 1 hour/day.
Per hour
1.1¢
at 40–100 W
Per day
1.1¢
1 hour/day
Per month
$0.34
1.8 kWh
Per year
$4.03
22 kWh
A heating pad draws about as much power as an old light bulb, and typical sessions last under an hour. Even daily use costs well under a dollar a month in every state.
Calculate it for your home
Per hour
1.1¢
Per day
1.1¢
Per month
$0.34
Per year
$4.03
Uses 1.8 kWh/month at 18.4¢ per kWh.
Cheapest and most expensive states
Monthly cost at typical usage, using each state's current average residential rate.
Cost in every state
| State | Rate (¢/kWh) | Per hour | Per month | Per year |
|---|---|---|---|---|
| Idaho | 12.4 | 0.7¢ | $0.23 | $2.72 |
| Utah | 13.0 | 0.8¢ | $0.24 | $2.85 |
| Oklahoma | 13.4 | 0.8¢ | $0.24 | $2.93 |
| Nebraska | 13.6 | 0.8¢ | $0.25 | $2.98 |
| Nevada | 13.6 | 0.8¢ | $0.25 | $2.98 |
| North Dakota | 13.6 | 0.8¢ | $0.25 | $2.98 |
| Missouri | 13.7 | 0.8¢ | $0.25 | $3.00 |
| Iowa | 14.1 | 0.8¢ | $0.26 | $3.09 |
| New Mexico | 14.1 | 0.8¢ | $0.26 | $3.09 |
| Louisiana | 14.2 | 0.9¢ | $0.26 | $3.11 |
| Arkansas | 14.4 | 0.9¢ | $0.26 | $3.15 |
| Tennessee | 14.5 | 0.9¢ | $0.26 | $3.18 |
| Montana | 14.7 | 0.9¢ | $0.27 | $3.22 |
| Wyoming | 14.8 | 0.9¢ | $0.27 | $3.24 |
| Kentucky | 15.0 | 0.9¢ | $0.27 | $3.28 |
| Washington | 15.0 | 0.9¢ | $0.27 | $3.28 |
| Kansas | 15.1 | 0.9¢ | $0.28 | $3.31 |
| North Carolina | 15.1 | 0.9¢ | $0.28 | $3.31 |
| Arizona | 15.2 | 0.9¢ | $0.28 | $3.33 |
| Florida | 15.2 | 0.9¢ | $0.28 | $3.33 |
| South Dakota | 15.7 | 0.9¢ | $0.29 | $3.44 |
| Georgia | 15.8 | 0.9¢ | $0.29 | $3.46 |
| Colorado | 16.2 | 1.0¢ | $0.30 | $3.55 |
| Mississippi | 16.2 | 1.0¢ | $0.30 | $3.55 |
| South Carolina | 16.2 | 1.0¢ | $0.30 | $3.55 |
| Oregon | 16.3 | 1.0¢ | $0.30 | $3.57 |
| Texas | 16.4 | 1.0¢ | $0.30 | $3.59 |
| Alabama | 16.8 | 1.0¢ | $0.31 | $3.68 |
| West Virginia | 16.8 | 1.0¢ | $0.31 | $3.68 |
| Minnesota | 17.0 | 1.0¢ | $0.31 | $3.72 |
| Virginia | 17.6 | 1.1¢ | $0.32 | $3.85 |
| Indiana | 18.2 | 1.1¢ | $0.33 | $3.99 |
| Delaware | 19.4 | 1.2¢ | $0.35 | $4.25 |
| Ohio | 19.5 | 1.2¢ | $0.36 | $4.27 |
| Wisconsin | 19.7 | 1.2¢ | $0.36 | $4.31 |
| Pennsylvania | 21.6 | 1.3¢ | $0.39 | $4.73 |
| Maryland | 21.8 | 1.3¢ | $0.40 | $4.77 |
| Michigan | 22.0 | 1.3¢ | $0.40 | $4.82 |
| New Jersey | 23.3 | 1.4¢ | $0.42 | $5.10 |
| Illinois | 23.9 | 1.4¢ | $0.44 | $5.23 |
| Vermont | 24.9 | 1.5¢ | $0.45 | $5.45 |
| Washington, D.C. | 25.4 | 1.5¢ | $0.46 | $5.56 |
| New Hampshire | 27.3 | 1.6¢ | $0.50 | $5.98 |
| Connecticut | 27.4 | 1.6¢ | $0.50 | $6.00 |
| Alaska | 28.2 | 1.7¢ | $0.51 | $6.18 |
| Maine | 28.6 | 1.7¢ | $0.52 | $6.26 |
| Massachusetts | 28.8 | 1.7¢ | $0.53 | $6.31 |
| Rhode Island | 29.5 | 1.8¢ | $0.54 | $6.46 |
| New York | 29.9 | 1.8¢ | $0.55 | $6.55 |
| California | 33.3 | 2.0¢ | $0.61 | $7.29 |
| Hawaii | 52.0 | 3.1¢ | $0.95 | $11.39 |
How to lower the cost
- Heat the person, not the house: electric blankets and heated throws deliver comfort for a tenth of a space heater’s draw.
- Every degree of thermostat setback saves roughly 1–3% on heating over an 8-hour stretch.
- Air sealing and insulation beat any heater upgrade — leaked heat is bought at full price.
Frequently asked questions
How much electricity does a heating pad use?
A typical heating pad draws about 60 watts in use. At 1 hour/day, that works out to roughly 0.1 kWh per day, or 1.8 kWh per month.
How much does it cost to run a heating pad for 1 hour?
At the current U.S. average residential rate of 18.4¢/kWh, one hour costs about 1.1¢. In Idaho (12.4¢/kWh) it's 0.7¢, while in Hawaii (52¢/kWh) it's 3.1¢.
How much does a heating pad cost to run per month?
With typical usage (1 hour/day), expect about $0.34 per month at the U.S. average rate — from $0.23 in Idaho up to $0.95 in Hawaii. Rates are as of May 2026.
Does a heating pad use a lot of electricity?
Not really — at typical usage it's under 1% of an average home's monthly consumption. Heating, cooling, hot water, and drying are the loads that move bills.